UFA Universal Fill Adapter - High Pressure Paintball Marker Remote Hose | CO2 Tank On/Off G1/2
UFA Universal Fill Adapter - High Pressure Paintball Marker Remote Hose | CO2 Tank On/Off G1/2
- This fill adaptor fit for G1/2-14 or 0.825"-14NGO thread HPA tank Cyclinder or CO2 Tank bottle.
- Most commonly seen on remotes and fill stations.
- Use high strength Polyurethane O-rings.
- Mede by Aluminum Alloy. Comes with spare sealing o-ring.
- There are several SKU for choose. With 8mm fill nipple, or 1inch gauge, or screw vent, or only the adapter.
G1/2 Universal Fill Adapter
Thread is G1/2-14, there are 4 SKUs, you can choose which you need.
Polyurethane o-ring
Using high-strength polyurethane as the material for quick disconnect o- rings, has a service life 10 times that of urethane material and can be used under a pressure of 6000psi.
- High pressure resistance
- Low temperature resistance
- Good friction resistance
- Easy installation
Universal Fill Adapter
The thread is standard G1/2-14, made by aluminum alloy and ferroalloy.
Easy to install and disassemble, convenient for replacing seal o-ring.
Comes with spare seal o-ring.
- G1/2-14 Thread
- Made by aluminum alloy and ferroalloy
- Easy to install and disassemble
- Comes with spare seal o-ring
One Hole
G1/2-14 thread, one hole, with spare seal o-ring.
One Hole with Nipple
G1/2-14 thread, one hole, with 8mm male fill nipple and spare seal o-ring.
Two Holes with Nipple and Gauge
G1/2-14 thread, two holes, with 8mm fill nipple and 1 inch 3000psi pressure gauge, and spare seal o-ring.
Two Holes with Nipple and Vent
G1/2-14 thread, two holes, with 8mm fill nipple and bleed vent, and spare seal o-ring.
Size of the product
The size is 1inch*2.5inches.
Weight is:
One hole: 2.4oz
One hole with 8mm nipple: 2.8oz
Two holes with 8mm nipple and gauge: 3.9oz
Two holes with 8mm nipple and vent: 3.9oz