Feyachi M40 Red Dot Magnifier - 3X Magnification with Adjustable Focus & Elevation | 37/40MM Height
Feyachi M40 Red Dot Magnifier - 3X Magnification with Adjustable Focus & Elevation | 37/40MM Height
- This optics magnifier adds 3X variable magnification to your standard red dot sight and maintains an expansive field of view with comfortable 2.4 inches eye relief
- Fully multicoated clear glass for sharp sight picture, ensure good resolution, enhanced light gathering capabilities, and provide solid color fidelity
- The quick-release mount with included a lower 1/3 co-witness spacer, with a fast flip-to-side engagement. The push-button design engages and disengages the flip mount, locking into place the magnifier. Designed to work with Absolute and lower 1/3 co-witness red dot scope
- The adjustable eyepiece provides a fast focus ability that helps keep the image sharp and clear. Windage / Elevation adjustability for optimum view centering
- The 3x magnifier sight is constructed of high-quality machined aluminum and anodized with a nitrogen purge, ensuring waterproofing, fog resistance, and shockproofing
Feyachi M40 Magnifier Sight
The Feyachi M40 magnifier scope is a lightweight and compact. The 3x magnifier that is made to enhance the magnification of non-magnified red dots or holographic sight. The fixed 3X magnification will improve your target recognition and acquisition over medium-range distances. Designed to work with Absolute and lower 1/3 co-witness red dot sights, with a fast flip-to-side engagement. The push-button design of the M40 engages and disengages the flip-mount, allowing the magnifier to lock in place in either configurations. It has a rugged all-steel mount and features an adjustable diopter for fine focus adjustments and generous eye relief.
Features
- 3X Variable Magnification
- Adjustable Ocular Focus to Dial in the Desired Focus
- Comfortable Eye Relief
- Provides 2 Height can be aligned with Absolute Co-Witness or Lower 1/3 Co-Witness Red Dot Sights
- Steel Flip to Side Mount
- Broad compatibility with Red Dot Sights
- Quick-Attaching Thumbscrew Mount
Adjusting Focus
To adjust the focus turn the Focus Dial clockwise or counter-clockwise until the image is as sharp as possible
Windage & Elevation Adjustment
- Windage/Elevation adjustability for optimum view centering.
- After the M40 magnifier is mounted behind of the Red-Dot, the dot may seem off-centered while viewing through the magnifier. This will not affect zero. If desired, the centering screws can be used to move the dot up/down or left/right until the dot is more centered. Do not force screws once resistance is felt and the end-of-travel range has been reached.
Flip to Side Mount
- Depress the button and push the magnifier to the side to dis-engage the magnifier. Depress again and push the magnifier back to re-engage.
- The magnifier flip mount comes with a gasket plate, which can be aligned with lower 1/3 Co-Witness, or Simple Low Profile Red Dot Sights
Absolute Co-Witness Height with Flip Mount
- Positions the magnifier at 37 mm/1.46 inches from the base to the center of the optic. This puts the dot height at a center (absolute) sight picture when co-witnessed with standard A2 iron sights.
- For this configuration, do not install the included riser plate and use the shorter screws.
Lower 1/3 Co-Witness Height with Flip Mount and Riser Plate
- Positions the magnifier at 40mm/1.57 inches from the base to the center of the optic. This puts the dot height at a lower 1/3 sight picture when co-witnessed with standard A2 iron sights.
- For this height, install the included riser plate between the magnifier and the Flip-Mount and use the longer screws.
Maintenance
- Keep Lenses Clean
- When cleaning the lenses, be sure to use products that are specifically designed for use on coated optical lenses.
- Be sure to blow away any dust or grit on the lenses prior to wiping the surfaces.
- Using your breath, or a very small amount of water or pure alcohol can help remove stubborn marks like dried water spots.
- Lubrication
- All components of the magnifier are permanently lubricated, so no additional lubricant should be applied.
- Storage
- If possible, avoid exposing your magnifier to direct sunlight or any very hot location for long periods of time.
Inside the Box
1 x M40 3X Red Dot Magnifier
1 x Flip to Side Mount
1 x Gasket Plate
8 x Screws
1 x Allen Wrenche
1 x User Manual
1 x Cleaning Cloth
