Short Shank Low Port Curb Bit - Capsule Sweet Iron 5 Inch

• Two Jobs, One Mouthpiece: The low port lifts clear so the tongue has room, and the Capsule center lets each half move alone. Both work at once in the same mouthpiece.
• A Short Lever, a Small Arc: The shank is the lever arm, and a short one travels through less of an arc. Light leverage, with a poll signal that comes and goes cleanly.
• Sweet Iron, Face Left Open: It arrives one shade and settles into another, and both are correct. Bare sweet iron darkens as it works, and that darker surface carries the mild sweet taste.
• Polished Where It Is Felt: Hammer forged, then hand polished at the port, the joints, and the shank ends, so the edges nearest the lip come back smooth under a thumb.
• Best For: Subtle Control: A western horse that wants tongue relief, and a rider who wants leverage that stays light. Balanced in the hand and easy to read through the rein.

Some horses in curb work want two small things: a little more room over the tongue, and leverage that stays light. This short shank low port bit is that answer. The port lifts clear so the tongue has somewhere to sit, the Capsule center lets each half of the mouthpiece move on its own, and the short shanks keep the lever arm brief, so the poll signal arrives and leaves inside a small arc. Forged by hand, then polished by hand. The port is shaped into the mouthpiece, and the joints and shank ends are worked, since those are the first places a leverage bit shows wear. It is balanced in the hand, which on a curb is the difference between a bit you ride with and a bit you think about. One material from surface to core, with the working face open to the air. Bare sweet iron darkens as you ride it in, taking on a warm working surface. The metal is the finish, so there is a single surface that simply matures with use. Rinse the bit after a session and dry it properly.