{"product_id":"mini-hf-shortwave-radio-transceiver-kit-7-023-7-050-mhz-diy-with-acrylic-shell","title":"Mini HF Shortwave Radio Transceiver Kit 7.023-7.050 MHz DIY with Acrylic Shell","description":"\u003chr aria-hidden=\"true\" class=\"a-divider-normal\"\u003e     \u003ch1 class=\"a-size-base-plus a-text-bold\"\u003e About this item \u003c\/h1\u003e                 \u003cul class=\"a-unordered-list a-vertical a-spacing-mini\"\u003e  \u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e \"PIXIE\" is mini the 40 meter band simple micro-power amplitude telegraph transceiver, 9 ~ 13.8V DC power supply  \u003c\/span\u003e\u003c\/li\u003e  \u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e Resistance to change is a horizontal packaging vertical packaging, easy to solve the short-circuit resistance has long been a problem.  \u003c\/span\u003e\u003c\/li\u003e  \u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e Power input does not distinguish between positive and negative, and to improve the power supply range, the user can easily use 13.8V communication power supply, and do not worry about the positive and negative reversed losses.  \u003c\/span\u003e\u003c\/li\u003e  \u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e Increasing the transmitter side as the buzzer sound prompts (using a jumper cap shielding sound), an increase of LED lights as transmitters prompt.  \u003c\/span\u003e\u003c\/li\u003e  \u003cli class=\"a-spacing-mini\"\u003e\u003cspan class=\"a-list-item\"\u003e You will receive the balun kits with the instructions.Or please contact the seller for the PDF instructions. Enjoy.Thx  \u003c\/span\u003e\u003c\/li\u003e  \u003c\/ul\u003e           \u003cdiv id=\"product-details-jumplink\" class=\"a-section\"\u003e \u003cspan class=\"caretnext\"\u003e›\u003c\/span\u003e \u003ca id=\"seeMoreDetailsLink\" class=\"a-link-normal\" href=\"#productDetails\"\u003e See more product details \u003c\/a\u003e \u003c\/div\u003e           \n       \u003c!-- show up to 2 reviews by default --\u003e\n                   \u003cp\u003e    \u003cspan\u003e\u003cbr\u003e Power Supply: DC9 ~ 13.8V (recommended linear power supply or battery), does not distinguish between positive and negative \u003cbr\u003e\u003cbr\u003e Antenna: 50 ohm, 7MHz, VSWR 2.0 or less\u003cbr\u003e\u003cbr\u003e Receiving Quiescent Current: 20mA\u003cbr\u003e\u003cbr\u003e Emission current: 120mA\u003cbr\u003e\u003cbr\u003e Transmitting power: 1.2W\u003cbr\u003e\u003cbr\u003e Frequency: The oscillator frequency emission; receiving local oscillator frequency \u003cbr\u003e\u003cbr\u003e Mode: CW\u003cbr\u003e\u003cbr\u003e Key: Manual key\u003cbr\u003e\u003cbr\u003e Automatic transmitter: Not supported \u003cbr\u003e\u003cbr\u003e Sidetone: None\u003cbr\u003e\u003cbr\u003e \u003c\/span\u003e\u003cspan class=\"a-text-bold\"\u003ehe circuit principle:\u003cbr\u003e\u003cbr\u003e See schematics: with the surrounding elements constituting a typical Colpitts oscillator and keeps oscillating (it has about 1mW when receiving an oscillating signal leakage), the LO signal is coupled directly to the capacitor 8050. \u003cbr\u003e\u003cbr\u003e In transmit state (key press), 8050 as a C class amplifier, the signal is amplified by 100nF capacitive coupling to the π-type low-pass filter, and then send the antenna; in the receiving state (key release), and around 9018 elements constituting the beat oscillator (BFO), 1N4001 plus high-voltage, direct current with capacitive pressure is increased at both ends decreases, the natural frequency can be increased to about 0-3KHz, can be easily received signals of 7.023MHz beat . \u003cbr\u003e\u003cbr\u003e8050 is biased in the non-linear region (the transistor is then two diodes back to back), and the signal received by the antenna BFO signal for mixing, mixing the audio signals obtained through coupling to the 0.1uF capacitor constituted LM386 audio power amplifiers, audio signal amplified by the LM386 5 feet 10uF capacitor blocking evacuation headphones. Key not only control the LM386 power on-off switch is also biased varactor D2, so that volume changes in different states.\u003cbr\u003e\u003cbr\u003e\u003c\/span\u003e    \u003c\/p\u003e","brand":"LJJDSLYU","offers":[{"title":"Default Title","offer_id":49915375354115,"sku":"B08JJ8B7YH","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0793\/3031\/2451\/files\/51BSltAEthL._SX800.jpg?v=1792522567","url":"https:\/\/purrosa.com\/products\/mini-hf-shortwave-radio-transceiver-kit-7-023-7-050-mhz-diy-with-acrylic-shell","provider":"Purrosa","version":"1.0","type":"link"}