About this item

• FixWood has been reformulated for better workability and adhesion to wood. The more malleable 2-part epoxy putty is easier to mix, press into damaged areas, and sculpt by hand while bonding more securely to properly prepared wood
• Easier to Shape and Apply: Mix equal parts resin and hardener, then mold by hand or with tools. FixWood stays in place without sagging, shrinking, or cracking, giving you more control when filling holes or rebuilding missing wood
• Make Permanent Repairs: Restore rotted, cracked, damaged, or missing wood on stairs, doors, frames, posts, exterior walls, fascia boards, rafters, window sills, shutters, ladders, split wood, deck boards, and other non-structural interior or exterior surfaces
• Acts Like Wood: Cured putty can be sanded, carved, drilled, cut, painted, or stained to blend easily with the surrounding wood species. High-strength repairs can also be fastened with nails and screws
• 100% Waterproof: Protects against water exposure once cured. For deep rot, use TotalBoat Penetrating Epoxy to consolidate wood first. Sizes: 2-Pint and 2-Quart Kit. Each kit contains equal parts Part A (resin) and Part B (hardener)

TotalBoat FixWood epoxy putty makes repairing rotted wood easy. Use it indoors or out, around the home, in the yard, and on your boat. Fix damage, dry rot, soft rot, broken, or missing wood in minutes.

Just knead the two components together by hand and press in place on the damaged area. If the wood piece is missing, shape FixWood by hand or with tools to recreate the desired shape. And don't worry about sagging because FixWood hangs in place, and stays where you put it. It dries hard enough to accept fasteners, but is still easy enough to sand or carve into shape. In addition to repairing rotted or damaged wood trim, window frames, window sills, door frames, fascia boards ,trim boards, shutters, doors, and deck boards, this epoxy repair compound is also great for filling non-structural screw holes because it won't shrink or crack.

Once cured, repaired areas can be stained or painted to blend in with the surrounding wood species, and they're 100% waterproof. TotalBoat FixWood saves you the headache and expense of having to remove and replace vintage or one-of-a-kind wooden parts that are irreplaceable.

It's so easy to use, has a generous working time of 30-35 minutes at 72°F, and can be sanded, finished, and fastened in approximately 6 hours.You'll ike the eco-friendly, no-VOC, no-odor formula.

If the wood is rotted, use low-viscosity TotalBoat Penetrating Epoxy first to stop the rot and consolidate the wood. Afterward, apply TotalBoat FixWood to fill or reshape the wood surface. Compare to System (3) Three SculpWood, Abatron WoodEpox, PC Products Woody, and Smith's Fill-It Epoxy Filler. FixWood has no shrinkage, is 100% waterproof once cured, easy to shape & color-blend, easier to sand, and is a better value. All TotalBoat products are designed for ease of use and are 100% made in the USA.